Fixturing Accessories
Reference Pin 3-4.7
spring suspended for reference drillings from 1.6 to 4.7 mm, drilling diameter for reference pin 5 mm +0.0/-0.05 mm More ...
Reference Pin 3-7.8
spring suspended for reference drillings from 4.5 to 7.8 mm, drilling diameter for reference pin 5 mm +0.0/-0.05 mm More ...
Guiding Brink
Guiding brink spring-suspended, for straight outer countours of PCBs, for board centring and guiding More ...
Box-Tip
Box with 200 pieces of high-quality spring contacts 1/10 " tip already in wire wrap receptacles, oriented in one direction, for fast loading of More ...
Box-Crown
Box with 200 pieces of high-quality spring contacts 1/10 " crown already in wire wrap receptacles, oriented in one direction, for fast loading More ...
Pneumatic Contact Pin
Pneumatic contact pin for mounting into the fixture outer diameter without receptacle 3 mm, 5.5 mm in state of rest, working height 12 mm, incl. More ...
3/2 Way Valve
3/2 way valve, 24 V incl. supply connector, 500 mm hose for controlling a pneumatic contact pin More ...
SKM Lateral Contacting with Manual Operation
SKM 110 Lateral contacting with manual operation incl. 8 mm thick base material for holding the bed of nails without spring contact pins, More ...
SKP Lateral Contacting with Pneumatic Operation
SKP Lateral contacting with pneumatic operation incl. 8 mm thick base material for holding the bed of nails without spring contact pins, More ...
Spring Switch Contact Pin
Spring switch contact pin (extra receptacle is not necessary), outer diameter ca. 2.35 mm More ...
Board 16 Channels
Board with 16 channels finds SMT solder defects The IC-Open Probe is applied to the IC and its inputs (connection pins) are connected to ground. More ...
Board Polarity
Board with 16 channels and evaluation electronics discerns polarity of capacitors Ground or a sine signal are alternatingly applied to the More ...
Temperature Board
16XTEMP Board with 16 channels for discerning temperature (-50 to 200 °C). The board controls the temperature properties of components in More ...
Probe for Solder Defect or Polarity Test
2.4, 5, 7, 10, 13, 20, 30 mm or 3 x 8 mm, 12 x 7 mm, 12 x 9 mm, 18 x 7 mm, 16 x 16 mm or 23 x 23 mm, incl. NF-cable (not mounted to square More ...
Probe Temperature
Spring-suspended probe for measuring temperature diameter 3 mm, 61 mm long. A 16XTEMP-Board is needed for evaluation. More ...
Spacing Piece
for fixing the distance of the probe for SMT solder defect test and polarity test More ...
Equipment for Pressing In Spring Contacts Manually
XYZ Equipment for manually pressing in spring contacts 100 mil, 75 mil incl. sleeve into the fixture exchange plate and guiding device for More ...
Starterkit for Building Fixtures Manually
Tools and Material for Building Fixture Bed-of-Nails 1 ergonomic frame for holding the fixture plate 380 x 297 x 8 mm 1 manual tool for More ...
WireWrapping Gun
Wire Wrapping Gun 14YB3-230/C, incl. automatic insulation, with stress core and guide sleeve More ...
